EZ Wet Look Finish - 5 Gallon

Apply EZ Polish System Sealer Wet-Look Finish to perfect, protect, and preserve the natural beauty of all your concrete & masonry surfaces. This high-gloss formula can also be used on pavers and artificial stone, and makes a great topcoat over stains.
• Excellent Topcoat Over Paints & Stains.
• 100% Acrylic for Maximum Durability.
• Interior/Exterior & Vertical/Horizontal.
• Resists Hot Tire Pick Up.
• Non-Yellowing.

Coverage Rate: 200 – 450 sf/gal (Coverage depends on equipment used)

Product Size: 5 Gallon Bucket

INSTRUCTIONS:

1) Stir or shake before applying. DO NOT THIN.
2) Use product when Temperature is between 50 – 80 F(10 – 27 C). Do not apply in direct sunlight. Do not apply to wet surfaces or if rain or heavy dew is expected within 24 hours.
3) Apply a thin coat using a nylon/polyester brush, 1/4” – 3/8” nap roller, high quality pad applicator or a high quality pump sprayer with an adjustable tip at a spread rate of 200-450 sq ft (19-42 m2) per gallon. Spread rate is highly dependent on surface roughness and porosity. If sprayed, backroll to uniform thickness with a microfiber pad.
4) Allow first coat to dry 4 hours, then apply a second coat at a spread rate of 350-700 sq. ft (33-65 m2) per gallon. Additional coats (no more than 4) may be added for a higher gloss and added protection.